Annotatsiya
The growing demand for environmentally friendly fuel technologies has stimulated the development of diesel fuel additives derived from renewable resources and industrial wastes. In this study, an eco-friendly diesel fuel additive synthesized from animal fat waste and waste monoethanolamine (MEA) was evaluated for its effect on harmful exhaust gas emissions. The additive was blended with commercial diesel fuel, and the concentrations of carbon monoxide (CO), nitrogen oxides (NOx), sulfur dioxide (SO2), unburned hydrocarbons (HC), particulate matter (PM), smoke opacity and carbon dioxide (CO2) were measured under identical engine operating conditions using a calibrated exhaust gas analyzer. Compared with neat diesel fuel, CO, NOx, SO2, HC, PM, smoke opacity and CO2 decreased by 28.8, 20.4, 23.8, 35.1, 35.8, 33.3 and 11.6%, respectively. The largest reductions in PM and HC indicate improved combustion completeness. The results show that the proposed additive can reduce harmful exhaust emissions while utilizing renewable and waste-derived feedstocks.
References
1. Smigins, R., Amatnieks, K., Birkavs, A., Górski, K., & Kryshtopa, S. (2023). Studies on engine oil degradation characteristics in a field test with passenger cars. Energies, 16(24), Article 7955. https://doi.org/10.3390/en16247955
2. Shimizu, Y., Fujinami, Y., & Kasai, M. (2023). The performance of diesel engine oil using ashless anti-wear additive and detergent (SAE Technical Paper 2023-32-0027). SAE International. https://doi.org/10.4271/2023-32-0027
3. Rao, X., Sheng, C., Hou, X., Wei, Y., & Dai, L. (2023). Preparation and properties of graphene composite lubricant additive used for cylinder liner in marine diesel burning low sulfur fuel oil. Wear, 528–529, Article 204994. https://doi.org/10.1016/j.wear.2023.204994
4. Eremeeva, A. M., Kondrasheva, N. K., Khasanov, A. F., & Oleynik, I. L. (2023). Environmentally friendly diesel fuel obtained from vegetable raw materials and hydrocarbon crude. Energies, 16(5), Article 2121. https://doi.org/10.3390/en16052121
5. Loo, D. L., Teoh, Y. H., How, H. G., Le, T. D., Nguyen, H. T., Rashid, T., Pottmaier, D., & Sher, F. (2023). Effect of nanoparticles additives on tribological behaviour of advanced biofuels. Fuel, 334, Article 126798. https://doi.org/10.1016/j.fuel.2022.126798
6. Zhao, F., Zhang, H., Zhou, Z., Wang, H., & Liang, Y. (2023). Synthesis and characterization of monoester succinate anti-wear agent for diesel fuel. Petroleum Processing and Petrochemicals, 54(1), 118–122.
7. Xia, X., Lin, J., Li, Y., & Tao, Z. (2022). Preparation of monoglyceride from biodiesel and its anti-wear performance in diesel. Petroleum Processing and Petrochemicals, 53(9), 89–95.
8. Tack, R. D. (2022). Fuel additives: Chemistry and technology. Wiley. https://doi.org/10.1002/9781119707394
9. Zhao, T.-B., Wu, Y.-S., Duan, Y.-Z., Huang, Z., & Han, D. (2022). RP-3 jet fuel lubricity and improvement measures. Journal of Jilin University (Engineering and Technology Edition), 52(3), 533–540. https://doi.org/10.13229/j.cnki.jdxbgxb20210334
10. Yang, Z., Ren, C., Jiang, S., Xin, Y., Hu, Y., & Liu, Z. (2022). Theoretical predictions of compatibility of polyoxymethylene dimethyl ethers with diesel fuels and diesel additives. Fuel, 307, Article 121797. https://doi.org/10.1016/j.fuel.2021.121797
11. Shimizu, Y. (2022). Recent trends in ashless anti-wear agents. Tribologist, 67(2), 101–106. https://doi.org/10.18914/tribologist.67.02_101
12. Naitoh, Y. (2022). Technological trends in boundary lubrication additives for automotive engine oil application. Tribologist, 67(2), 75–82. https://doi.org/10.18914/tribologist.67.02_75
13. Yu, M., Zhang, J., Joedicke, A., & Reddyhoff, T. (2021). Experimental investigation into the effects of diesel dilution on engine lubrication. Tribology International, 156, Article 106828. https://doi.org/10.1016/j.triboint.2020.106828
14. Burov, E. A., Ivanova, L. V., Koshelev, V. N., Saudzhieva, D. A., Sarkisov, S. A., & Dzhusubalieva, T. O. (2021). Evaluation of the efficiency of functional additives to winter diesel fuels of various hydrocarbon group compositions. Chemistry and Technology of Fuels and Oils, 57(1), 16–25. https://doi.org/10.1007/s10553-021-01223-0
15. Ji, X., Cai, L., Ji, Z., & Liu, J. (2021). Application of friction improver in heavy duty diesel engine oil. Lubrication Engineering, 52(2), 92–96.
16. Tumanyan, B. P., Shcherbakov, P. Y., Sharin, E. A., Matin, M. E., & Matveeva, O. A. (2020). Effectiveness of vegetable-oil fatty acids as anti-wear additives for diesel oils. Chemistry and Technology of Fuels and Oils, 56(4), 517–529. https://doi.org/10.1007/s10553-020-01164-0
17. Klimentova, G. Y., Zhuravleva, M. V., & Vagapov, B. R. (2020). Synthesis and screening of components of anti-wear additives based on plant raw materials. Journal of Chemical Technology and Metallurgy, 55(5), 995–1000.
18. Fox, M. F. (2005). A model for diesel fuel additive lubricity. In Life cycle tribology (Tribology and Interface Engineering Series, Vol. 48, pp. 585–591). Elsevier. https://doi.org/10.1016/S0167-8922(05)80060-4
19. Selby, K., Urbanak, M., Leonhardt, H., Colbourne, D., Burnett, P., Machatschek, F., & Beviere, S. (2005). Meeting the lubrication challenges of heavy duty low emission diesel engines. In Proceedings of the World Tribology Congress III. ASME. https://doi.org/10.1115/WTC2005-63983
20. Tsuchihashi, K., Shirakawa, H., & Saitoh, Y. (2004). Experimental analysis for accumulated ash in DPF: Effect of high quality low ash oil. Review of Automotive Engineering, 25(3), 285–289.
21. Hedrich, K., Scherer, M., Herzog, S. N., & Renner, G. D. (2003). The influence of dispersant PAMA on soot handling, wear and fuel economy in heavy duty diesel oils (SAE Technical Paper 2003-01-1959). SAE International. https://doi.org/10.4271/2003-01-1959
22. Lubricants & additives file: A new synthetic Mobil oil [Dossier lubrifiants & additifs: Une nouvelle huile de synthèse Mobil]. (2002). [journal name], (1761), 43.
23. Sivebaek, I. M., Sorenson, S. C., & Jakobsen, J. (2001). Dimethyl ether (DME) – Assessment of viscosity using the new volatile fuel viscometer (VFVM) (SAE Technical Paper 2001-01-2013). SAE International. https://doi.org/10.4271/2001-01-2013