Annotatsiya
This article examines the operating principles of satellite television, the processes of television signal transmission and reception, and the structure of receiving equipment. The main components of a satellite television reception system, including the parabolic antenna, polarizer, low-noise block converter, coaxial cable, and receiver, are described along with their functions in signal reception and processing. A comparative analysis of analog and digital television signal transmission methods is presented, highlighting their specific characteristics, advantages, and technical capabilities. Particular attention is paid to digital signal coding, compression, and modulation, including the QPSK, 8PSK, 16APSK and 32APSK modes of the DVB-S2 standard. A comparison of DVB-S2 modulation and coding modes shows that in a 36 MHz transponder the useful bit rate increases from about 30 Mbit/s (QPSK 1/2) to 111 Mbit/s (32APSK 3/4), while the required Es/N0 rises from 1.0 to 12.7 dB; an illustrative Ku-band link budget for a 0.6 m antenna gives a clear-sky C/N of about 15.5 dB. The analysis demonstrates the importance of satellite television in providing extensive geographical coverage, transmitting multiple television channels, and enabling individual signal reception by subscribers
References
1. Maral, G., Bousquet, M., & Sun, Z. (2020). Satellite communications systems: Systems, techniques and technology (6th ed.). John Wiley & Sons.
2. Roddy, D. (2006). Satellite communications (4th ed.). McGraw-Hill.
3. Pratt, T., Bostian, C. W., & Allnutt, J. E. (2003). Satellite communications (2nd ed.). John Wiley & Sons.
4. Inglis, A. F., & Luther, A. C. (1997). Satellite technology: An introduction (2nd ed.). Focal Press.
5. Benoit, H. (1999). Satellite television: Analogue and digital reception techniques. Butterworth-Heinemann.
6. Fischer, W. (2010). Digital video and audio broadcasting technology: A practical engineering guide (3rd ed.). Springer.
7. ETSI. (2014). Digital Video Broadcasting (DVB); Second generation framing structure, channel coding and modulation systems for broadcasting, interactive services, news gathering and other broadband satellite applications; Part 1: DVB-S2 (ETSI EN 302 307-1 V1.4.1).
8. ETSI. (2005). Digital Video Broadcasting (DVB); User guidelines for the second generation system for broadcasting, interactive services, news gathering and other broadband satellite applications (DVB-S2) (ETSI TR 102 376 V1.1.1).
9. Minoli, D. (2015). DVB-S2 modulation extensions and other advances. In Innovations in satellite communications and satellite technology. John Wiley & Sons.
10. Elbert, B. R. (2004). The satellite communication applications handbook (2nd ed.). Artech House.
11. ETSI. (2015). Digital Video Broadcasting (DVB); Second generation framing structure, channel coding and modulation systems for broadcasting, interactive services, news gathering and other broadband satellite applications; Part 2: DVB-S2 Extensions (DVB-S2X) (ETSI EN 302 307-2 V1.1.1).
12. Ugolini, A., Modenini, A., Colavolpe, G., Mignone, V., & Morello, A. (2016). Advanced techniques for spectrally efficient DVB-S2X systems. International Journal of Satellite Communications and Networking, 34(5), 609–623. https://doi.org/10.1002/sat.1140